Jeff,
simplest way is to mirror CAT signals to RRC's COM1 and connect that
port to the PC.
73, Olli
Contest, DX & radio projects: http://www.dh8bqa.de
Am 01.08.2015 um 15:21 schrieb k...@arrl.net:
I run local and remote every week as I travel from my main station location
to my antenna restricted shore home. I don't have a problem swapping out the
DB-9 serial port cable, the PTT cable, and the audio out cable when I switch
over, it takes about a minute to do so. What I would like to do is split the
serial cable from my local PC to the K3 and the RRC-1258. This would allow
me to run my NaP3 panadapter s/w along with the RRC-1258, allowing me to
view the panadapter at the remote control station with teamviewer. I tried a
simple Y cable and it didn't work, anyone have this working? I have a copy
of LP_Bridge running, maybe activate yet another virtual comport? I'm trying
to keep this as simple as possible as I leave the frozen north for Florida
for 7 months after the summer is over here and require a bullet proof
setup....
73 Jeff kb2m
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to dro...@necg.de
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
