You nailed it.  That took care of it.  I forgot that I needed to press A>B 
twice.

Thank you


David K0LUM

> On Jan 18, 2016, at 2:38 PM, Bill Conkling <n...@widomaker.com> wrote:
> 
> You are correct that the KDVR3 is not needed for CW messages.  However, you 
> must be in CW mode (or one of the two DATA sub-modes PSK-D or FSK-D) for 
> these messages to work.  And, if you are set to SPLIT operation, VFO B must 
> also be in CW mode.
> 
> They also work in TEST mode.  However, be careful, my K3S MODE button is more 
> fussy than the button on my K3 and sometimes when trying to get the TEST 
> mode, I press the  button not quite right and it goes to SSB/LSB so that when 
> I press it again, now i’m in TEST mode, but in SSB instead of CW.
> 
> …bill  nr4c
> 
>> On Jan 18, 2016, at 3:16 PM, David Christ <radio...@mchsi.com> wrote:
>> 
>> I have myself confused.  Is the KDVR3 required to use the CW message 
>> memories? At first I thought it wasn’t but I used the K3 Utility to load 
>> some messages into the CW memories.  Then I placed the K3 into test mode and 
>> CW mode.  When I press any of the M1-M4 keys I get the message  “NO DVR” in 
>> the VFO B area.  So is the KDVR3 required or am I doing something wrong.  
>> Neither the K3 manual or the Cady book have helped me understand this.  
>> Neither says the KDVR3 is needed and the KDVR3 manual only talks about voice 
>> recording which implies it is not involved with CW message memories.
>> 
>> David K0LUM
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n...@widomaker.com
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to