Thanks Don On Sat, Feb 13, 2016 at 10:22 AM, Don Wilhelm <w3...@embarqmail.com> wrote:
> Paul, > > The ALC bars is not relevant when using FSK D (or PSK D), that is only for > soundcard driven data modes. > > K3 Terminal is there for convenience, and while is does the job, it was > not intended to be a "logger", so no serial number incrementing is possible. > > For FSK D, take a look at MMTTY - it can do both soundcard AFSK A and FSK > D if you build a "one transistor keying device" to 'wiggle' the FSK IN pin > on the K3 ACC connector. > > 73, > Don W3FPR > > > On 2/13/2016 10:01 AM, Peter Pauly wrote: > >> I'm using the K3 Terminal and FSK D mode for the RTTY contest and am doing >> "okay" but have the following questions: >> >> 1. My ALC indicator shows 6 or 7 bars, more than I would like. Is there >> any >> way to adjust the output in FSK D mode? >> >> 2. In the K3 Terminal, is there any way to have an incrementing serial >> number (required in this contest)? >> >> I usually use FLDigi which has that feature with AFSK, but I'm trying to >> get the hang of FSK-D. >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w3...@embarqmail.com >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com