Hello, New build, K3S s/n 10669. Everything went well, but when I got to the TX Gain calibration (low power) something isn't quite right.
Using the K3 Utility (ver. 1.15.6.27), the utility says that the "power won't settle" and won't get past the 160m band. Watching it, the displayed power value fluctuates around 5.0 W. You can see it in this video: https://youtu.be/mKK9PYv8fFg Manually setting the band, and doing the tune at 5W setpoint shows pretty much the same thing on every band ... the displayed power 'hunts' around 5W. The power measured at the external power meter, however, does not seem to be moving, it is pretty stable. Reported SWR is 1.1 : 1. This radio does not have the KAT3 in it. The 100W amp is not yet installed. Firmware: MCU 5.38; FPF 1.25; DSP 2.86 Any advice would be appreciated. Thank you, David AJ4TF -- View this message in context: http://elecraft.365791.n2.nabble.com/Tx-Gain-Cal-failed-tp7614318.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com