Oops. That should be the RADIO setting in the KPA500… - Jack, W6FB
> On Aug 12, 2016, at 8:14 PM, Jack Brindle <jackbrin...@me.com> wrote: > > Make sure the RADIO setting in the K3 didn’t get changed away from K3. More > specifically, it sounds like it was changed to ANALOG without having the > proper pin connected to the Icom’s analog band data signal. > > If that isn’t the problem, then I’ll have more questions to see how we might > fix the issue. > > 73! > > - Jack Brindle, W6FB > Elecraft Engineering > > >> On Aug 12, 2016, at 7:23 PM, Jorge Mejia P <lauss...@icloud.com> wrote: >> >> >> >> Para: Elecraft@mailman.qth.net >> Asunto: Kpa 500 problem when auxiliary cable connected ... >> >> I had been successfully using my KPA500 with an Icom and a K3 , >> alternatively with the use of the Key Line interrupter and a separate key >> line. >> Suddenly I cannot change bands on theKPA500 or go on Tx, even though the >> auxiliary cable is well seated and the Key line interrupter is well screwed >> to the K3 . The kpa500 works fine with the K3 alone, or when I disconnect >> the auxiliary cable from the K3 ,then I can change bands and use it with the >> Icom as long as I turn it off and the on again . >> >> This happens even when the K3 is off . I have also tried disconnecting the >> k3s serial cable to the computer and even from the PS , but no luck. >> >> Wonder if any one has experienced such a problem. >> >> Any ideas? >> >> Thank you >> Jorge HK4CZE >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to jackbrin...@me.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jackbrin...@me.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com