Z3 board came loose and probably damaged. Removed and soldered a jumper
re Elecraft support. We have power.
Nothing on receive yet. Triple checking on the tmp cables etc as I have
had the radio apart many times.
AGC, pre amp seem to have no effect. Receive on the xvter board is also
dead.
W0MU
On 2/16/2017 10:00 AM, Petr, OK1RP/M0SIS wrote:
Ken,
first-aid idea (as you said both RXs dead and Cal failed...) :
1. Turn ON K3
2. On the K3 front panel, hold CONFIG menu and turn tech mode on (CONFIG:
TECH MD ON).
3. Tap MENU to exit the menu and then tap DISP on the K3 front panel.
4. Rotate the VFO B knob to display SYN1 in the VFO B area of the display.
You should see the
status OK. the same for SYN2 status OK after...
If there is no OK status of both synths then check the all TMP coax cables
from and to the synths boards and check if synths boards seats well in the
multi-pins headers...
73 - Petr, OK1RP
-----
http://ok1rp.blogspot.com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Fwd-Mayday-K3-no-receive-no-output-tp7626976p7626985.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w...@w0mu.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
