Yes
Try these-- credit to K4MTX these work on the KX2 as well.
https://k4mtx.wordpress.com/2013/06/02/kx3-how-to-configure-n1mm-to-use-function-keys-to-send-cw-without-additional-cables-or-hardware-like-winkeyer/
F1 Cq,{CATA1ASC KY cqtest * *;}
F2 Snt,{CATA1ASC KY 5nn # #;}
F3 Tu,{CATA1ASC KY tu;}
F4 {MYCALL},{CATA1ASC KY *;}
F5 His Call,{CATA1ASC KY {call} ;}
F6 Repeat, {CATA1ASC KY # #;}
F7 Exch, {CATA1ASC KY #;}
F8 Agn?,{CATA1ASC KY agn? ;}
F9 Nr?,{CATA1ASC KY nr? ;}
F10 Call?,{CATA1ASC KY cl? ;}
F11 Break,{CATA1ASC RX;}
F12 Wipe,{WIPE}
-----Original Message-----
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Irma &
Linas(LY2H)
Sent: Wednesday, March 22, 2017 5:08 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] KX2 on N1MM+
Hello group,
Is it correct that KX2 does not support the CW/PTT operation through the
DTR/RTS ports? I have tried it out on the N1MM+ logger with no success. It does
control the VFO, the band/mode change but no sending CW from the logger nor
switchin PTT. My K3 which has the menu item for the DTR/RTS configuration is
doing it all perfectly under the same logger configuration.
Is there any other way to get CW/PTT control on KX2 from the N1MM+ logger?
Thanks for the inputs!
73 Linas LY2H
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ct...@ewnetinc.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
