The speaker wire I use is the insulated flat stuff ~16 AWG equivalent.  Rolls 
up into a nice small ball.  I put a alligator clip on one end and a ring 
terminal for the KX3.
Mel, K6KBE

      From: Michael Walker <va...@portcredit.net>
 To: donw...@embarqmail.com 
Cc: "Elecraft@mailman.qth.net" <Elecraft@mailman.qth.net>
 Sent: Thursday, June 15, 2017 2:58 PM
 Subject: Re: [Elecraft] Wire size for the ground on the KX2
   
If this is for an RF ground, you'll need bigger than 22G for it to be
effective.

Braid would be preferred.

Mike va3mw


On Thu, Jun 15, 2017 at 5:25 PM, Don Wilhelm <donw...@embarqmail.com> wrote:

> Mike,
>
> I would use #22 teflon insulated wire.  Teflon because it is 'slippery'
> and that can help with wire tangles.  Thinner wire may be lighter weight if
> you are weighing fractions of ounces, but it is quite durable. Anything
> thinner becomes more fragile.  IMHO that is a reasonable compromise.
>
> 73,
> Don W3FPR
>
> On 6/15/2017 4:27 PM, Mike Morrell wrote:
>
>> Given the small size of the mini banana plug for KX2 ground connection ,
>> what size wire are folks using ; assuming ease of transport , etc.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va...@portcredit.net
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to farrerfo...@yahoo.com


   
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to