Tom,
Have you centered the CW signal in the CWT bargraph? That is necessary
- use auto-spot for an easy way to tune the signal to center.
You could try narrowing the filter width to isolate that one signal.
73,
Don W3FPR
On 7/17/2017 11:38 AM, Tom Parish wrote:
Problem: I'm not seeing any CW decoding anymore except when I manually
touch the paddles.
I can hear CW signals coming in strong but no decoding seems to be occuring
for them.
Settings:
MODE: CW
FILTER: .45
CWT: on
Logging: On
Green LED is showing
RX Thr - I've tried from THR1-THR4 - no change
The "T" is showing in the lower right hand corner
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
