Good news. I run all my Elecraft stuff at 38400. But if 9600 works why change :-).
73, John N1JM > On Apr 27, 2018, at 1:14 PM, Bill Frantz <fra...@pwpconsult.com> wrote: > > Bingo! It had been reset from 38400 to 9600. I have no idea how or when. > Thanks for the clue. > > 73 Bill AE6JV > > (BTW, did I say that I hate RS232. With all the parameters that can go wrong, > and many strange voltage conventions, it seems to be an interface designed to > cause problems.) > > On 4/26/18 at 9:19 PM, johnn...@gmail.com (John_N1JM) wrote: > >> Is the *host serial port baud rate* set correctly in the PX3? >> >> John N1JM >> >> >> Bill Frantz wrote >>> I'm sitting in New Hampshire and I find I can't get my computer to talk to >>> the KX3 when it goes through the PX3 using the ACC1-PC jack. The computer >>> can talk to the KX3 when plugged in directly to ACC1 jack on the KX3, and >>> the PX3 can get the frequency data when plugged into the same jack. >>> >>> I have the same problem with both wsjt-x and RUMlogNG, so I don't think the >>> problem is in the computer software. The USB <--> RS232 seems to be >>> working, so I suspect the PX3. >>> >>> Does anyone have any suggestions for something to fix to get both the >>> computer and the PX3 to talk to the KX3? (I'm low on test equipment here, >>> but I do have a DVM.) > ------------------------------------------------------------------------- > Bill Frantz | Airline peanut bag: "Produced | Periwinkle > (408)356-8506 | in a facility that processes | 16345 Englewood Ave > www.pwpconsult.com | peanuts and other nuts." - Duh | Los Gatos, CA 95032 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com