...for gold, silver or nothing.
Just adding the 5, 10 and 20% tolerance colors.
Eric KE6US
On 6/15/2018 5:25 PM, Ken G Kopp wrote:
>From the distant past ...
Bad Boys Rape Our Young Girls But Violet Gives Willingly ...
73!
K0PP
________________________________________
On Fri, Jun 15, 2018, 18:13 Fred Jensen <k6...@foothill.net> wrote:
OK, cool! I'd like to see it work. While I have a lot of respect for
design folk, and especially those who design the super easy websites to
use where you find what you need, do it, leave, and your coffee is still
hot, the Mech E's who can visualize in 3D with motion astound me. I
understand the multiple reels of feedstock. It's the "remove the parts
from the tape" part that I find hard, that tape was really sticky. [:-)
Every time I've asked my wife to tell me the colors on a resistor, even
after I tell her, "They're all supposed to be preschool colors," I still
get, "Well, sort of reddish-orange ... might be a little pink too."
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 6/15/2018 4:43 PM, GaryK9GS wrote:
Hi Fred,
It's called a sequencer. Individual reels of tape and reel axial parts
are loaded in the sequencer. So there would be an entire reel of 10k
resistors, a separate reel of 100k, separate reel of diodes, etc.
The sequencer then removes the parts from the tape and creates a new
tape with the parts in the proper order and count. The sequencer my
company used to have would also measure the value of the part and reject it
if it wasn't in the tolerance window.
I hope that all makes sense...
Surface mount is oh so much easier. We have 9 surface mount lines and
rarely use the axial through hole inserter these days.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric.c...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
