Yes it was a typo it should have been RTS The RTS (Request To Send) and CTS (Clear To Send) probably don't need to be tied together but some programs may want it so I tied them together.
On Tuesday, June 4, 2019, 3:30:20 PM EDT, Andy Durbin <a.dur...@msn.com> wrote: "Before plugging that into the K2 AUX IO connector, the Green, Brown, and Red conductors must be cut or damage to the K2 and/or the adapter can be damaged." It appears to me that the only AUX connector pins that are used by this proposed cable are 2, 3, and 5. If the K2 will accept RS-232 levels without damage then I don't see how any damage can be done by the proposed cable. The cable specification would be clearer if the meaning of "RTC" were known. I suspect it's a typo for RTS and that the CTS and RTS wires are tied together but not connected to the AUX connector. 73, Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
