Sounds like you have RF getting in somewhere. Given that the PC sometimes loses it’s mind, I’d look there first. Do you have ferrites on the various connections going to the PC?
Grant NQ5T > On Aug 27, 2020, at 12:41 PM, David Haines <dhai...@bates.edu> wrote: > > Here are more details: > > All seems to be working fine on 160m-10m except for 17m, so KX3 VFO is at > 18.100 for the rest of this discussion. > > Without WSJT-X running, ATU finds a 1.1 match and TUNE button on KX3 works as > expected. > > With WSJT-X running, using the WSJT-X TUNE button causes the following: > > 1. KXPA100 power LED's light from left to right _twice_, in synchronization > with a musical ringing that rises in frequency, then settle down quietly to > about 100W. > > 2. Around the same time Windows reports "USB device not recognized" and the > mouse cursor disappears. At this point different things can happen: Maybe > the cursor comes back and I can stop the TUNE at WSJT-X. Maybe it doesn't > and I have to shut off the KX3 with XMIT button. Sometimes the PC freezes > and needs a hard reset. > > 3. The KXPA100 fault table lists no faults. > > Anybody seen anything like this? > > david, KC1DNY, KX3 #08651 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
