Terry, I'm glad you found it - congratulations on the good troubleshooting steps.
73, Don W3FPR > -----Original Message----- > > Thanks for your assistance, I found the problem and the Freq. counter is > now working. > > I used one of the 2n2222's from the RF board and replaced Q9. But, this > did not fix the problem so I checked the voltage at the base and Q9 and > found none. Checking the voltage at Q10 I found .73Vdc. Checked for > voltage at RP4 pin 1 and found none, checked RP4 pin 2 and found > 3.something. Reheated pins 1 and 2 and bang problem fixed, .73Vdc at Q9 > base and freq. counter working. > > Thanks for your help. It's been a long time since I followed a > schematic. All in all a good learning experience. Now back to > building. > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com