Don’t attempt to use a standard RS232 cable with the K2. You should be using a specially made cable which is shown in the manual.
73 Ian On 27 Feb 2021 at 21:25:28, Dave Sublette <k4to.d...@gmail.com> wrote: > Is the KUSB cable compatible with the K2? Should have asked this before I > bought the cable. My K2 has worked with a serial port adapter from Keyspan > for several years and with a variety of logging programs. > > I had to ditch the keyspan because BiG Sur doesn't have a driver and > Keyspan doesn't have a compatible driver for Big Sur > > So I went with the KUSB. When I connect it, the K2 does strange things. > Power control turned all the way down results in a nice 10 watt output and > normal operation. When Power control is turned up I get a HiCurr and LoPWR > error and the display only shows power, not frequency. > > Any thoughts? > > Thanks and 73, > > Dave, K4TO > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to maud...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com