I believe the SWR meter in the transceiver is at the input of the
internal tuner, not the output. Since it always reads close to 1:1 when
the tuner is engaged you may not notice if the antenna has a high SWR.
Alan N1AL
On 5/16/2021 5:10 PM, Wayne Burdick wrote:
The K4 shows all four TX bar graphs simultaneously: power, SWR, ALC, and
compression. In addition you can select numeric display of power, SWR, supply
voltage and current drain for the status area, which defaults to date/time.
Wayne
N6KR
----
elecraft.com
On May 16, 2021, at 12:18 PM, Ray <wa6...@gmail.com> wrote:
My K3 has a SWR display next to the RF Power meter in the Display.
So it Sounds like the K4 Does Not have that type of Display ?
WA6VAB K3
On May 16, 2021, at 11:04 AM, Tom Doligalski via Elecraft
<elecraft@mailman.qth.net> wrote:
...
I normally would have noticed the change in SWR, and realized that I had an
antenna problem. But, of course, I had tuned the K4 for the first time on 80M
when I received it!
A learning moment (operator error?). Gonna try to check the antennas out a bit
more frequently!
73, Tom W4KX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com