What about the K3 for RX on 8m?   Mine bounces me to 44.000 MHz if I try to
enter 40.662 MHz via CAT or front panel.

73 de AI6KG



On Thu, Jun 27, 2019 at 3:39 PM Wayne Burdick <n...@elecraft.com> wrote:

> The K4 should work at 40-41 MHz without modification, though I wouldn't
> guarantee specs without performance testing.
>
> 73,
> Wayne
> N6KR
>
>
>
> > On Jun 27, 2019, at 2:52 PM, Ed K1EP <k1ep.l...@gmail.com> wrote:
> >
> > Maybe for RX. For TX, you have to consider spurs, harmonics, filters and
> > other technicalities. So, it is not trivial.
> >
> > On Thu, Jun 27, 2019, 17:36 Dennis Moore <den...@mail4life.net> wrote:
> >
> >> SDR, should just be a modification to the firmware.
> >>
> >> Dennis NJ6G
> >>
> >> On 6/27/2019 13:44, David Gilbert wrote:
> >>> A friend just advised me of a new FCC Petition for Rule Making that
> >>> requests the creation of a new amateur band for 8m somewhere between
> >>> 40 and 41 MHz.
> >>>
> >>> https://ecfsapi.fcc.gov/file/105260090923685/8%20meter%20PRM.pdf
> >>>
> >>> I doubt it gets any traction, but it makes me curious if any mods
> >>> (software or hardware) would be practical to allow the K3 or K3s or K4
> >>> to cover that range.  I suspect the upper low pass band filter would
> >>> preclude that possibility.
> >>>
> >>> 73,
> >>> Dave  AB7E
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c...@murgatroid.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to