Dave,
What power is displayed on the KPA500? The KPA500 would fault if indeed
the K3s is putting out that much power. The KPA500 power bar is pretty
accurate, just a bit coarse in its increments.
I think a power calibration is in order for the P3 power indicator.
73,
Don W3FPR
On 4/7/2023 2:12 PM, Dave New, N8SBE wrote:
So, I was the guy that had a P3 display/boot problem recently.
I sent it to the mother ship for repair, and they found that (get
this) the 12V supply was shorted to the 3.3V supply (eep!).
So, a new(er) I/O board (which contains the supplies) and a
replacement blown 3.3V LCD controller later, I have an (almost) fully
functional P3 again.
EXCEPT, the TX Monitor function is now funky. It claims that my K3s
is putting out 873 (or so) watts! I've tried both sensors (I had a
200W HF sensor on the shelf since I added a KPA500 and changed to a
2KW HF sensor), and although the scale max changes on the P3 display
when I change sensors, it still way overstates my output power. The
KPA500 is showing 1360 watts on the P3!
I unplugged/re-plugged everything, did a visual inspection of the TX
Monitor adapter board under a lighted magnifying glass, looking for
missing/broken SMD resistors or caps, but so far no soap.
I'm wondering if the new revision I/O board is somehow incompatible
with the older TX Monitor board, or maybe there is a missing 1M-ohm
resistor to ground on the I/O board at the sensor connector, or an
incorrect series resistor value there.
And yes, I sent a note to support, but I haven't heard back, yet.
Wondering if anyone (Alan?) has any ideas where this behavior is
coming from. The wattmeter in both my K3s and KPA500 are working
normally. It's just the P3 wattmeter that's gone off the deep end, now.
Thanks, and 73,
-- Dave, N8SBE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3fpr...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
