Chris,
Go to my webpage www.w3fpr.com and scroll down in the left column to the
K2 Frequency Calibration article.
That should give you instructions on not only getting the dial
calibration correct, but also getting the SSB frequencies within a
proper range.
Note that the SSB audio frequencies are dependent on the center
frequency which can be adjusted during the frequency calibration procedure.
73,
Don W3FPR
On 9/24/2023 6:57 PM, Chris wrote:
Hello,
I have a K2 with its USB off by about 1.9kHz. This K2 was built by someone,
and I am the third owner. How do I calibrate it? Moreover, the audio of
USB mode is a little harsh to my ears. Everything else seems working fine.
Thanks,
Chris KM1B
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3fpr...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
