I have a KPA-1500, and followed the manual's instruction to run an Aux
cable between my K-3's ACC jack (on the KIO3B) and the KPA-1500. I
prefer to have the band changing already accomplished before I go key
down, even for just a dit.
73, Pete N4ZR
On 11/13/2023 7:14 PM, Jim Brown wrote:
I have cables that control the amplifier for each radio.
By default, the KPA500, KPA1500, and KAT500 all have
near-instantaneous frequency-detection. They switch very quickly to
the right band, and the tuners will recall previous antenna tunings
for the detected frequency. All it takes is a dit or a tap on the mic.
That's in addition to the front panel band switches. I own all three,
and have never used an AUX cable with any of them.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pete.n...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
