We've released a new revision of K3 firmware (both MCU and DSP). Please
see the release notes below.
73,
Wayne
N6KR
* * *
MCU 1.65 and DSP 1.52, 1-27-08
* TUNE POWER level menu entry added (TUN PWR). This determines the
power level used
when the TUNE switch is pressed. The default, "NOR", uses the power
knob setting.
Alternatively, the value can be set to any power level from 0.1-120
W.
* EXTERNAL CW TIMING IMPROVED: Corrected rise/fall time asymmetry.
Internal
and external keyers should now be closely matched in weighting.
NOTE: You may need to reduce the weight of external keying, if you
had increased
it to compensate.
* REAL-TIME-CLOCK display now keeps accurate time. The RTC IC itself
was running
accurately, but the VFO B time display was running about 10% slow.
* MODE SWITCH now only cycles through one sideband (LSB or USB) on
each band --
not both. Saves time when switching modes, especially useful in
contest situations.
Use the ALT switch (hold the left end of MODE) to switch between
LSB and USB (per-band).
NOTE: As a result of this change, you may need to re-select the
desired sideband on
some bands. You'll only have to do this once.
* S-METER ACCURACY Improved. Suggest using SMTR SC=14 and SMTR OF=24
(these are the normal defaults).
---
http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com