Jon:
I used my K1 using 80 KHz for a few years and then
wanted to work higher in the bands so I changed it to
150 KHz. I enjoyed a few QSOs between 7100 and 7145
KHz. After a few weeks I went back to 80 KHz. It just
tunes too fast.
Most of my QSOs were made between 7025 and 7065 on 40M
30M is a good band also.
20M is also good between 14025 and 14065 KHz
I made a few QSOs on 17M. Since I have changed the
17M to 15M I have heard a few sigs there but not QSO.
I have K1 # 1423 since 2003. I had it set up for 40,
30, 20 and 17 M. With a 88' dipole at 35' , fed with
ladder line. This is a great rig, I will continue to
use and enjoy it.
I am waiting for my K3. I want more bands and SSB.
Good luck.
73, TY, W1TF at about 35'
--- Jon Perelstein <[EMAIL PROTECTED]> wrote:
> I would appreciate peoples' thoughts, suggestions,
> experiences setting the VFO range at 80KHz vs.
> 150KHz on a K-1.
>
> I've got a dual-bander running 40 meters and 20
> meters. I'm a general class. Normal range for a
> general on 40 meters is 7,025Khz - 7.125KHz (100KHz
> spread) and on 20 meters is 14,025KHz -
> 14,150KHz (125Khz spread).
>
> Thanks in advance.
>
> Jon
> KB1QBZ
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
