Thanks Steef and Ron. I did have my customer confirm the BL1 is 1.5 x 3.
So, I'm going to make up one with those dimensions for him to test (the
other connections look like they line up with the BL2).
If anyone else with a BL1 is interested in an enclosure, please contact
me off list and we'll arrange something.
Thanks again & 73,
Dave W8FGU
Steef PA2A wrote:
The BL2 PC board is 1.5 x 3.8 inch. The enclosure will be at least 1.5 x
4.0 inch.
Steef PA2A
----- Original Message ----- From: "Ron D'Eau Claire" <[EMAIL PROTECTED]>
To: "'Dave Van Wallaghen'" <[EMAIL PROTECTED]>; <elecraft@mailman.qth.net>
Sent: Sunday, November 02, 2008 6:19 PM
Subject: RE: [Elecraft] Mini-modules: BL1 vs BL2 dimensions
I don't have a BL2 on hand, but the BL1 pc board is 1.5 x 3 inches.
Ron AC7AC
-----Original Message-----
Does anyone know if the PCB dimensions for the BL1 & BL2 are the same? I
had a customer needing an enclosure for his BL1 and asked me if it would
fit in my BL2 enclosure. I looked at the manuals on the Elecraft site,
but found no dimension info for the BL1.
Thanks in advance & 73,
Dave W8FGU
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
