After a recent calamity while attempting PSK31, where I introduced 13.5v
into microphone jack pin 6 (a 5v line), repairs have been made, and I have made
contacts in both cw and ssb modes.
However, I seem to be getting more HI CURRENT warnings on bands and at power
levels where previously, I did not.
I re-initialized the KAT2, and, as I cycle through L0-L8 and C0-C8, all
relays provide a nice click.
I performed the dc voltage checks at the bottom of KAT2 manual, page 22.
Everything was fine, except for U4, pin 7 where I got a reading of 4.74v
instead of the 0v or nearly 0v that the manual implies I should see. Could
this be
the cause of the HI CURRENT warnings?
Thanks for your consideration.
73, Jef Fox kc9gbx
**************Great Deals on Dell Laptops. Starting at $499.
(http://pr.atwola.com/promoclk/100000075x1217883258x1201191827/aol?redir=http://ad.doubleclick.
net/clk;211531132;33070124;e)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
