Not at this time and not sure if this is one of the audio routing scenarios being considered. Lyle??
That said....You can make an adapter if you wish. On the front panel and back panel phone jacks the tip is the main rx and the ring is the sub RX audio. If you make an adapter that has both ears connected to the ring connection when you turn the Sub Rx on you should hear only sub audio in both ears. In fact with the K3's two phones connections you can probably use the front jack in normal operation...left=main and right=sub and use the rear panel with the adapter so a spotter hears only the sub. But the op using the front panel jack will hear both the main and the sub. Unless of course you build another adapter opposite of the rear panel...putting both ears to the tip. VERY IMPORTANT...don't use mono plugs...always use stereo plugs!! ------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 On Fri Apr 10 11:31 , Ruben Navarro Huedo sent: >Hello friends: >Today we have been testing the K3 (with sub installed) for our S04R >expedition. >We want listen Subreceiver (and only sub) in both ears, not only the right. >Is this possible? > >TNX a lot. > >-- >Rubén Navarro Huedo - EA5BZ >http://www.palotes.com >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: Elecraft@mailman.qth.net','','','')">Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
