Correction to my poor grammer, should have said ".....Waiting to hear back from Elecraft to see if they can move the lower limit freq up a bit to xmit in the 7.6Mhz area"
W4GRJ wrote: > > Yes you are correct, just got off the phone with Elecraft ...it is due to > the IF at approx 8.2Mhz. > This is a big deal to me as a MARS/SHARES operator. Waiting to hear back > from Elecraft to see if they can move the freq up a bit to xmit in this > area. Otherwise, I will have to put my TS-480 back on the air...glad I > caught this before selling the TS-480. > > > 4Z5TO wrote: >> >> This blocked tx freq. range is normal. 8 MHz is used for the IF, so >> transmitting there'abouts would probably not be a good idea for the K3. >> >> It's written down somewhere, I just can't recall where... >> >> 73, >> 4Z5TO >> >> >> W4GRJ wrote: >>> >>> I have done the open the transmit frequency software update. The radio >>> will work on all freqs outside the Ham bands EXCEPT between 7.55Mhz and >>> 8.99Mhz. Tried to check in to the SHARES net for the first time with my >>> new K3 on freq aprox 7.6Mhz and got the BND END message. >>> >>> Any other MARS operators can confirm same issue or is it unique to my >>> rig? I have a call into Elecraft, but thought I would try here in the >>> meantime. >>> >>> Tnx, >>> Jack >>> W4GRJ / AFA4DG >>> >>> >> >> > > -- View this message in context: http://n2.nabble.com/MARS-operation-problem-tp4210053p4210634.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html