> On 7. Jul 2021, at 12:24, andy pugh <bodge...@gmail.com> wrote: > > Trying to investigate run-from-line last night (looking at issue > https://github.com/LinuxCNC/linuxcnc/issues/246 ) I found that > sim-axis-vismach-VMC_toolchange doesn't seem to work with master-gtk3. > I don't know if it is specific to that config, or whether there is a > general Vismach problem, or possibly a problem with the current state > of my repository at the time. > > I was more interested in other things at the time, so didn't > investigate further, but switching to master made it work again.
Last time I checked vismach worked fine, but I will double check. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers