Agreed. Installed po4a 0.66 with Gdebi! Works perfectly.
A couple of questions though, after three fresh installs I have settled on
a a RIP installation as per
https://www.qtpyvcp.com/install/dev_install.html.
python3 -m pip install --editable .
ends with
Successfully installed qtpyvcp
then
daniel@LinuxCNC:~/dev/qtpyvcp$ qtpyvcp -h
Traceback (most recent call last):
File "/home/daniel/.local/bin/qtpyvcp", line 33, in <module>
sys.exit(load_entry_point('qtpyvcp', 'console_scripts', 'qtpyvcp')())
File "/home/daniel/dev/qtpyvcp/qtpyvcp/app/__init__.py", line 72, in main
from qtpyvcp.utilities.opt_parser import parse_opts
File "/home/daniel/dev/qtpyvcp/qtpyvcp/utilities/opt_parser.py", line 64,
in <module>
from linuxcnc import ini
ImportError: cannot import name 'ini' from 'linuxcnc' (unknown location)
My LinuxCNC RIP location is ~/dev/linuxcnc-dev.
I tried
cp scripts/.xsessionrc ~/
log out and log back in then, qtpyvcp -h yields the same results...
At this point I am trying to install everything as a RIP because I need
ethercat as well as qtpyvcp. So I did the usual git download of Linuxcnc
2.9, then followed
https://forum.linuxcnc.org/ethercat/45336-ethercat-installation-from-repositories-how-to-step-by-step#237098
to install the ethercat files. My thinking is that if I can get qtpyvcp
installed then I could build the deb files for my final installation for my
production machine. The full monty would be able to install Glade as well
so I could update my old custom g-screen (lathezy) in the much sexier
qtpyvcp.
Also, the included install script enters an endless loop when it asks for
linuxcnc directory.
Seems like this is a path issue and not an install issue, any thoughts?
Kind regards,
Dan
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
