The jog inhibiting code from motion-inhibit was purposely removed some time ago. Why, I don't know because it was put in by me specifically for that purpose a long while back.
as for feed-hold, my guess would be the code change affected it too - probably by accident. maybe adding separate jog-inhibit pins would satisfy everyone? Chris ________________________________ From: Jon Elson <[email protected]> Sent: December 4, 2022 5:03 PM To: [email protected] <[email protected]> Subject: Re: [Emc-developers] feed hold ? On 12/4/22 10:44, Jon Elson wrote: > I was demoing my touch probe yesterday and saw something > odd. This probe uses IR signals, and so the interface will > detect loss of IR communication and cause a feed hold. I > was astonished to see that the keyboard jog keys allowed > me to move the axes while feed hold was true! The probe > interface sends that status to motion.feed-hold, and I > have a tally LED in PyVCP to show the status. I'm using > LinuxCNC 2.8.2 Looking at the docs, there is an option that needs to be set, so I tried connecting the feed hold to motion.feed-inhibit. That made no difference it still allowed jog keys to move the axes when motion.feed-inhibit was true! This seems like a real bug! Thanks, Jon _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
