John, The documentation looks awesome. thanks Stuart
On Mon, Apr 12, 2021 at 8:09 AM John <j...@gnipsel.com> wrote: > Thanks for finding that, I can fix that ASAP > > JT > > On 4/11/21 11:33 PM, Stuart Stevenson wrote: > > Hi, > > I was reading the LinuxCNC gcode list. I noticed the G52 section example > is > > G53. This may not be the intended G value. I would attempt to change it > (if > > it is possible for me to do so) if I was sure the change needed to be > made. > > > > http://linuxcnc.org/docs/html/gcode/g-code.html#gcode:g52 > > I think the value should be G52 in that section. 😇 > > > > I also made some changes to my files here. This is a nit picking change > but > > it was fun and didn't take very long. I changed all the G18 references to > > ZX instead of XZ. This now matches the Fanuc (and almost et al) control > > usage. > > I did the same for all the UW axis designations. They are all now WU to > > follow the same pattern as the ZX designation. > > thanks > > Stuart > > > > > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
