At NASA we call this kind of answer MOTO - Master of the Obvious, but I 
can't think of any reason the dwell time would be other than the longer of
the detector time constant or a small integer multiple of the broadband
spike repetition period.

----------
>From: "Gordon,Ian" <ian.gor...@edwards.boc.com>
>To: "'IEEE EMC & SAFETY PSTC'" <emc-p...@majordomo.ieee.org>
>Subject: DWELL TIME FOR AVERAGE DETECTORS
>Date: Tue, Apr 30, 2002, 4:18 AM
>

>
> Can anybody advise as to what dwell time should be used for an average
> detector when measuring a broadband noise source? This time obviously
> increases the total test time unnecessarily if set too high and reduces the
> measurement accuracy if set too low.
> Thanks
> Ian Gordon
>
>
>
> *********************************************************************
> This footnote confirms that this e-mail message has been scanned for
> the presence of known computer viruses by the MessageLabs Virus
> Control Centre. However, it is still recommended that you use
> local virus scanning software to monitor for the presence of viruses.
> *********************************************************************
>
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
>      majord...@ieee.org
> with the single line:
>      unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>      Ron Pickard:              emc-p...@hypercom.com
>      Dave Heald:               davehe...@attbi.com
>
> For policy questions, send mail to:
>      Richard Nute:           ri...@ieee.org
>      Jim Bacher:             j.bac...@ieee.org
>
> All emc-pstc postings are archived and searchable on the web at:
>     http://ieeepstc.mindcruiser.com/
>     Click on "browse" and then "emc-pstc mailing list"
> 

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to