I think the units you're looking to compare to would be Amps/meter. The conversion from Tesla to A/m is:
1 A/m = 1.26 uT = 0.0126 Gauss Therefore, a field of .7 mT converts to 555 A/m !!! (it is also equivalent to 10 Gauss) Assuming that your customer is referring to power frequency magnetic fields, this would be substantial, to say the least. I would recommend that you question your customer a little further as to how they determined this field strength requirement. It seems high by a factor of about 1000. Good luck, Mike -----Original Message----- From: marti...@appliedbiosystems.com [mailto:marti...@appliedbiosystems.com] Sent: Thursday, February 07, 2002 4:22 PM To: emc-p...@majordomo.ieee.org Subject: Teslars??? We have a customer that is concerned about how our product, laboratory equipment, will respond to electromagnetic disturbances from a high speed train that runs close to their lab. The customer states that the disturbance will be around 0.7-1.2 m Teslar. Can someone please explain what the unit Teslar is and how that unit relates, or if it relates, to the immunity tests of EN 61000-4-3 Radiated immunity, or any other immunity test. Has anyone ever had a similar concern from a customer dealing with this type of disturbance? Your responses are appreciated. Regards Joe Martin EMC/Product Safety Engineer Applied Biosystems marti...@appliedbiosystems.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"