Probably as this is a transceiver with ancillary equipment (though heavily integrated?) the combi EN 301489-17/EN 301 489-1 will be applicable.
The latter limits the emission Class to Class B (for ancillary electronics) only and refers to EN 55032 as test method.
Note that RED standards are prone to changes in the close future, make sure you have the last version and re-check if another version may be listed
(cited) in the OJ-L. Use a Notified Body otherwise. Gert Gremmen On 17-9-2019 8:48, John Woodgate wrote:
Not exactly. The question was strictly about 'Class', which of course can mean different things in different standards, but my answer is, I think, correct for Europe. Intentional radiation is excluded from the CISPR standards and is covered by the ETSI standards cited by Charlie Blackham.Best wishes John Woodgate OOO-Own Opinions Only J M Woodgate and Associateswww.woodjohn.uk Rayleigh, Essex UK On 2019-09-16 23:55, peterh...@aol.com wrote:John,Are you saying that a product with intentional radiator only needs to meet Class A for emissions in EU? i.e there is no difference in terms of the limit between intentional and unintentional radiators when it comes to EU. Is that a correct statement?Thanks Peter -----Original Message----- From: John Woodgate <j...@woodjohn.uk> To: peterhays <peterh...@aol.com>; EMC-PSTC <EMC-PSTC@LISTSERV.IEEE.ORG> Sent: Mon, Sep 16, 2019 11:34 am Subject: Re: [PSES] Intentional radiator Class A or Class BThat should be CISPR 35, not CISPR 24 now. In Europe, it would be Class A. The manual should say 'This product is not to be used in a residential environment.'.Best wishes John Woodgate OOO-Own Opinions Only J M Woodgate and Associateswww.woodjohn.uk <http://www.woodjohn.uk> Rayleigh, Essex UK On 2019-09-16 17:56, peterh...@aol.com <mailto:peterh...@aol.com> wrote: The product is an ITE and follows CISPR 32 and CISPR 24 It will be sold globally The product is a small touch panel. -----Original Message----- From: John Woodgate <j...@woodjohn.uk> <mailto:j...@woodjohn.uk>To: peterhays <peterh...@aol.com> <mailto:peterh...@aol.com>; EMC-PSTC <EMC-PSTC@LISTSERV.IEEE.ORG> <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>Sent: Mon, Sep 16, 2019 12:37 am Subject: Re: [PSES] Intentional radiator Class A or Class BTo give a reliable answer, we need to know the type of product or the EMC emission standard that applies (e.g. CISPR 14-1/EN 55014-1) and which countries/regions it will be sold in.Best wishes John Woodgate OOO-Own Opinions Only J M Woodgate and Associateswww.woodjohn.uk <http://www.woodjohn.uk> Rayleigh, Essex UKOn 2019-09-16 03:51, 000006cee064502d-dmarc-requ...@ieee.org <mailto:000006cee064502d-dmarc-requ...@ieee.org> wrote:Dear Colleagues,I have a client that design and manufacture products for use in non-residential environment. This product consists of a BT module. I am told that the product must meet Class B emissions. Is this correct? What if we put an statement in the user manual stating that this product is not to be used in residential market? Would that give us the pass to go to Class A?Thank you all Peter - ----------------------------------------------------------------This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org <mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.Website: http://www.ieee-pses.org/Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com>>- ----------------------------------------------------------------This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org <mailto:emc-p...@ieee.org>>All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.htmlAttachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.Website: http://www.ieee-pses.org/Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com>>
-- Independent Expert on CE marking Harmonised Standards (HAS-) Consultant @ European Commission for RED and EMC EMC Consultant Electrical Safety Consultant - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
<<attachment: g_gremmen.vcf>>
