My 4th axis has a MT2 so I use a MT2 to ER40 adapter. Something like https://www.ebay.ca/itm/224459288505 although I don't recall the source and definitely have no opinion on that particular vendor. It centers within a couple of thou with no adjustment required. It is secured into the MT2 socket using a long SHCS from the back. The additional protrusion from the face of the rotary table is a plus to provide additional clearance.
-----Original Message----- From: John Dammeyer <[email protected]> Sent: December 7, 2021 5:37 PM To: Enhanced Machine Controller (EMC) <[email protected]> Subject: [Emc-users] ER32 collet chuck I'm thinking of ordering one of these for my 4th axis so that I can finally get LCNC to do more than just demonstrate that I can rotate it under computer control. It appears to fit the same registration as the smaller 3 jaw chucks so a face plate that can register it or the chucks would be in order. Good idea? Or don't go that way… "ELS! Nothing else works as well for your Lathe" Automation Artisans Inc. www dot autoartisans dot com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
