Maybe this G156 could be implemented in Lcnc.. https://www.youtube.com/watch?v=N_tozv1szIo
It's great, but also limited in that you need a broaching tool the width of the broach. One should be able to broach a 4mm slot with say, a 3mm width tip On Tue, 25 Oct 2022 at 10:45, andy pugh <[email protected]> wrote: > On Tue, 25 Oct 2022 at 09:31, Roland Jollivet <[email protected]> > wrote: > > > > If you have a CNC lathe, you could do this; > > > > https://www.youtube.com/watch?v=TW6QPl8Oy7g > > It could be done with a mill too, with a non-rotating fixture on the > head. But that still needs a run-out at the shoulder. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
