You might try GB OX-GUARD on the contacts to lower the friction. --J. Ray Mitchell Jr. [email protected]
"Much of the social history of the Western world, over the past three decades, has been a history of replacing what worked with what sounded good." -- Thomas Sowell On Fri, Jun 6, 2025 at 12:33 PM fxkl47BF--- via Emc-users < [email protected]> wrote: > On Fri, 6 Jun 2025, jrmitchellj wrote: > > > nHave you tried tying a lanyard through one of the mounting holes, and > using it to pull the connector out? > > > > I work with a highschool robotics team, and that is a trick they use on > their competition robots. But you need to be sure it is contained so not > to get caught on something, and > > accidentally disconnected > > i printed some trianglular handles for them > i still need something with a little more mechanical advantage > the handles are a help if one connector is bolted to something > but if they are connected cable to cable it's a pain > maybe the rope would work if i could put my foot on one connector > > > . > > --J. Ray Mitchell Jr. > > [email protected] > > > > "Much of the social history of the Western world, over the past three > decades, has been a history of replacing what worked with what sounded > good." > > > > -- Thomas Sowell > > > > > > > > On Fri, Jun 6, 2025 at 8:12 AM fxkl47BF--- via Emc-users < > [email protected]> wrote: > > i use quite a few anderson sb175 connectors > > https://powerwerx.com/anderson-sb-connectors-sb175-175amp > > my old hands are increasingly having a hard time disconnecting them > > is there a tool for this or maybe a design to make one > > i'm having no luck finding such a critter > > > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
