On 10/20/25 23:35, jrmitchellj wrote:
Did you try an alt-tab combo to check if there was a dialog box open, and
hidden?
I didn't know about that but I'll take a look b4 I reboot it again. The
row of buttons at the top of its screen continued to work normally, they
just didn't do anything to the machine, and the keyboard worked also. as
it was in a safe position to raise the head and a quick bump on page_up
moved the Z I also checked F1 & F2 which when F2 is on enables machine
power, and they both worked normally. I have that enabled on all of my
machines thru SSR's controlled by LCNC. The mill has a huge capacitance
in the spindle supply so those SSR's are staged for soft starts, else it
trips a 30A breaker in the service. With the soft start it runs fine on
a legal 20, even with the motor stalled.
Thanks J. Ray.
--J. Ray Mitchell Jr.
[email protected]
(818)324-7573
"Much of the social history of the Western world, over the past three
decades, has been a history of replacing what worked with what sounded
good."
-- Thomas Sowell
On Mon, Oct 20, 2025 at 4:29 PM gene heskett <[email protected]> wrote:
I see linuxcnc still can't single step a subroutine, so I commented out
those 2 lines making it normal code & put an m2 after it.
Running in g21 I single stepped thru the routine, finding my speeds way
to slow but it worked, but I had a comma in the middle of the last
debug line, so it didn't print the 2nd argument at the end. Now its been
restarted & reloaded several times and while all the mouse buttons appear
to work, the machine does nothing, no code executes. Short of rebooting,
I think I've done everything I know how to do. code attached after I
restored
the o100 sub endsub stuff. Ideas? I'm fresh out. It single stepped just
fine once, hasn't moved a motor since.
Thanks all.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Don't poison our oceans, interdict drugs at the src.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Don't poison our oceans, interdict drugs at the src.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
