Hi Andrew I've run EMC2 from a USB stick but it was using one of the smaller distros that had a USB install as an option. It seemed to run fine but all of it was pulled into RAM and run from there.
I also have a stock Ubuntu 6.06 install to a CF chip on one of those IDE disk adapters. I ran some tests on it and concluded that such a system was not ready for the big time using an as-is install. I did not optimize the install or make any of the parts of the file system run from RAM disk. I presume that such a task, properly done would yield a workable system. I've also got a couple of scratch USB sticks in the bin that I tried to build ext2 file systems on and failed. They seem to work properly as long as I didn't try to change partitions or file systems. Good luck and keep us informed. Ray On Sun, 2007-09-16 at 13:40 +1000, AKSYS Tech Pty Ltd wrote: > Hi > > I am trying to install EMC using the Ubuntu live cd. I am trying to > install to a USB key as my hard drive, as I am wanting to have a solid > state hard drive. This key is a 8Gig stick. I get about 98% through > the install but as soon as it starts to install the Grub bootloader, > the install fails. Has anyone used a usb key as a hdd before??? Any > thoughts on what I should try next??? > > > > Regards > > Andrew > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users