Hi Miroslav,

that's even less. I'd say it's realistic to expect about 25-30.000 pulses / 
second from emc2 without majour problems.

Regarding trapezoidal profile, it does it properly if you set the right 
acceleration values.
S-curve profiles haven't been implemented yet.

Regards,
Alex

----- Original Message ----- 
From: Miroslav Pejic
To: [EMAIL PROTECTED] ; Enhanced Machine Controller (EMC)
Sent: Saturday, November 17, 2007 9:53 PM
Subject: Re: [Emc-users] LiveCD update


HI MATT,
MY BIG MISTAKE!
IT ISN'T 600 BUT 60 PULSES IN 75 MILISECONDS
REGARDS,
MIROSLAV


On 11/17/07, Matthew Glenn Shaver < [EMAIL PROTECTED]> wrote:
On Sat, 2007-11-17 at 18:47 +0100, Miroslav Pejic wrote:
> Hi Alex,
> I'm about to use emc2 to drive my embroidery multihead machine. But,
> I'm  not shure about speed. Embroidery machine runs at 400 rpm.That
> means Emc2 must generate up to 600 pulses in 75 miliseconds, at two
> independent paralell port lines, and with acceleration and
> decceleration phases, trapesoidal (or S-curve shape if possible).
> After this is 75 miliseconds pause for preparing next pulse
> generation.
>
> Question is: is this possible ?

600 pulses / 75 milliseconds = 8 pulses/millisecond, or 8000 pulses per
second.

This should be no problem at all!

Matt



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users






-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/



_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users




No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.0/1135 - Release Date: 11/16/2007 
10:58 PM 


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to