Thanks Ray. I tried this, but at first it didn't work (the monitor wouldn't sync). Adding a line to specify the mode as 1280x1024 was the final touch.
Thanks again (and to SWPadnos who suggested the same thing with less detail on IRC). Ken Ray Henry wrote: > On Wed, 2008-08-20 at 18:01 -0400, Kenneth Lerman wrote: >> I'm trying to use Axis with the latest release and am having a problem. >> >> When Axis starts, the screen "breaks up". There are dark horizontal >> lines appearing on the Axis window and across the screen to the right of it. >> >> It looks like some sort of video problem. TKemc does not have the same >> problem. >> >> Has anyone seen this before. Anyone have a cure? >> >> Ken > > I had a few little problems with the AXIS GUI display using the default > via display driver on a couple of 8.04 systems here. They went away > when I switched to vesa. I did that by adding the following lines > to /etc/X11/xorg.conf between existing sections about line 25. > > Section "Device" > Identifier "Configured Video Device" > Driver "vesa" > EndSection > > Rayh > > > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
