On Mar 31, 2009, at 10:15 PM, Shabbir Hussain wrote: > > Has anyone used Vitalsystems Motenc-Lite (7544)? > Is there any significant difference (in rapid moves) by running the > machine with 7i43-P or 5i20? > > > <snip>
The Mazak emc conversion at fest a few years ago used the Motenc- Lite board. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?MazakRetro If you need ADC's then this is the board to use; otherwise the mesa boards are just fine. The only other board I know of that has ADC's is the servo-to-go board which only works with an ISA bus motherboard. HTH Dave > > ---------------------------------------------------------------------- > -------- > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
