Take a look at www.sheetcam.com Regards, Alex ----- Original Message ----- From: "Marshland Engineering" <marshl...@marshland.co.nz> To: <emc-users@lists.sourceforge.net> Sent: Sunday, October 10, 2010 11:26 AM Subject: [Emc-users] DXF to G-Code
> Can anyone recommend a goo DXF to G-Code converter? Lower cost would be > great. > It is for a plasma cutter so I need to order the cutting sequences. > > Thanks Wallace > ------------------------------------------------------------------------------ > Beautiful is writing same markup. Internet Explorer 9 supports > standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3. > Spend less time writing and rewriting code and more time creating great > experiences on the web. Be a part of the beta today. > http://p.sf.net/sfu/beautyoftheweb > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.862 / Virus Database: 271.1.1/3187 - Release Date: 10/09/10 21:34:00 ------------------------------------------------------------------------------ Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
