On 6 Sep 2015, at 03:03, Sebastian Kuzminsky wrote: > After many new features, much testing, and many bug fixes, I'm pleased > to announce the release of LinuxCNC 2.7.0! >
Thanks for that. It is much appreciated. > This release is codenamed "I Kill Kokomo". > As for the butt dialling ... we really need to get to the bottom of this.... > The major new features since 2.6 are: > > * new trajectory planner (from Rob Ellenberg of Tormach) > * support for RT-Preempt real-time (from Jeff Epler) > * support for importing Mach3 configs via StepConf > * better ARM support > * better docs > * many new drivers and features > * bug fixes > * probably other things that I've forgotten! > > > Instructions on how to upgrade from 2.6 to 2.7.0 are here (note this may > require manual changes to your config, detailed on this webpage): > > http://linuxcnc.org/docs/2.7/html/getting-started/updating-linuxcnc.html > > > Instructions on how to make a fresh install of 2.7.0 are here: > > http://linuxcnc.org/docs/2.7/html/getting-started/getting-linuxcnc.html > > Thanks for these. This is a particularly clear and straightforward set of instructions. > Many thanks to all the folks who worked hard to add features, fix bugs, > write docs, run tests, and report how things were or weren't working. > > Here's to many more years of friendly, effective collaboration! > > > -- > Sebastian Kuzminsky > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Marcus ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
