They are servos, pretty big for the machine size too. Thanks for the link! The machine is the same as the one they discuss (Körner 532S). The computer is still working so I will see if I can dig out any config from it. In worst case I'll rip the hardware out and buy some new drivers and a breakout board. Will probably be cheaper than spending hours of investigating the old electronics.
/S 2017-02-18 13:23 GMT+01:00 Peter Blodow <p.blo...@dreki.de>: > Sven, please specify more detail of that machine, at least name, number > etc. There is a company (koerner.net), 36456 Barchfeld (bei Bad > Salzungen), Germany, making CNC machines. The motors are long, still may > be steppers, i use to have similar ones (Dunker Motors), somewhat smaller. > > Peter > > PS: look here: > https://de.industryarena.com/forum/fraesmaschine-wieder- > zum-leben-erwecken--80000.html, > although it's in German. > > > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
