My thinking is that the 7i43 is best used for rt tasks with an EPP port,
hence the problem. I should have been more explicit. The plan is mb ->
7i43 -> 7i42 for stepper-servos.
Dave
On 1/28/22 11:17 AM, Chris Albertson wrote:
On Fri, Jan 28, 2022 at 10:18 AM dave engvall <dengv...@charter.net> wrote:
hi,
I'm looking for users that are actually using a motherboard with a 7i43
and can recommend candidate boards from experience. Thanks in advance.
A related question I have is "Does choice of mainboard matter?" I'd guess
if you are using the USB interface it wouldn't.
I was thinking of using the Ethernet interface Mesa board but then read it
needs a dedicated Ethernet port in the host PC. This means buying,
installing, and configuring an Ethernet card. The PC or any PC today
already has half a dozen USB ports. Even a Raspberry Pi has 4 USB ports
and might work well for this.
But my question is not about using a specific PC, but rather if it matters.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users