The VAD threshold is what the velocity is allowed to drop to after the THC is activated. THC won't activate until the velocity has reached 99.9% of the cut feed rate setting.
> On 4 Jun 2023, at 5:53 pm, Viesturs Lācis <viesturs.la...@gmail.com> wrote: > > Hello! > > I have an issue with PlasmaC. The thing is that VAD lock is active, > when actual velocity is _above_ VAD threshold rather than below. So > the consequence is that on long parts the torch height is not > adjusted. > I asked client to film it and I posted here: > https://youtu.be/7EPQrzv1RZ8 > > Should I just go there and update to 2.8.4? Or am I missing something > else in settings? I do not remember having this issue last time I was > there sometime last year and the machine is around 3 years old. > > Viesturs > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
