On 9/8/22 13:10, John Dammeyer wrote:
I didn't see anything on the Acorn that suggests it supports a Charge Pump to
protect the system if the PC goes bye-bye.
For that matter, small survey question here, how many people running LinuxCNC
are actually using a Charge Pump for safety?
I have but safety was not a prime consideration at the time. I was out
of i/o and setup an addreesable sceme to add another decoder giving me 7
more things I could control. PITA to setup PITA to use, since replaced
with a 7i76. Yonks ago now.
John
-----Original Message-----
From: andy pugh [mailto:bodge...@gmail.com]
Sent: September-08-22 1:08 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Acorn CNC
On Thu, 8 Sept 2022 at 07:43, <marcus.bow...@visible.eclipse.co.uk> wrote:
Would a Tormach with PathPilot allow me to drop into programming mode
easily?
I would expect so, the G-code is exactly the same (other than,
possibly, different handing of T in lathe mode)
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
� George Fitch, Atlanta Constitution Newspaper, 1912
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
