On 5/15/24 19:21, Jon Elson wrote:
On 5/15/24 12:23, Todd Zuercher via Emc-users wrote:
I'm trying to figure out something goofy that seems to be going on
with my acceleration settings.
I'm running Linuxcnc 2.9.0 and Axis ui.
I have all of the max_acceleration settings set for 20.0 (and
stepgen_maxaccel = 25), and for some reason everything only moves
with an acceleration of 10 ipsps for G0 and G1 moves (confirmed with
Halscope), but jogging does go at 20. Is there normal behavior or am
I missing some setting somewhere that is limiting the acceleration?
In the latest LinuxCNC there are TWO places that have accel and max
velocity settings. Jogging is in the JOINT_x part, and CNC moves are in
the AXIS_x section. In general, you want the same settings in both
JOINT and AXIS sections.
Jon
I didn't know you could set them differently Jon. Any time I fiddle with
those, if they don't match, hal yell's at me and exits.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
