Updated link, it seems that only moderators could vote in the original link.
https://forum.linuxcnc.org/27-driver-boards/57844-linuxcnc-hardware-survey#338840 On Sat, 22 Nov 2025 at 21:30, andy pugh <[email protected]> wrote: > > In an attempt to determine which hardware drivers are actually in use, > and so should be maintained, I have created a survey at: > https://forum.linuxcnc.org/29-forum-announcements/57844-linuxcnc-hardware-survey#338840 > > Unfortunately it only allows one selection (a limitation of the forum > software) > > If you are using a hardware interface which has no votes then please > vote for that. In fact if you know that anyone _else_ is using > something on the list with no votes, then vote for that. > > This isn't about how many of each interface are in use, in most cases > it's about if any _at_all_ are in use. > > (Until looking at the driver in the drivers folder I hadn't even heard > of Siemens EvoReg, for example) > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
