Hi Andreas,
Thank you for your reply.
I've tried to configure from the c++ application (is this what you meant?)
using:
ecrt_slave_config_sdo8( slave_config, 0x1C13, 0, 0 ); // clear sm pdo
0x1c13
ecrt_slave_config_sdo8( slave_config, 0x1A00, 0, 0 ); // clear TxPdo
0x1A00
// Define TxPdo
ecrt_slave_config_sdo32( slave_config, 0x1A00, 1, 0x31010010 ); //
Status
ecrt_slave_config_sdo32( slave_config, 0x1A00, 2, 0x31010020 ); //
Pos
ecrt_slave_config_sdo32( slave_config, 0x1A00, 3, 0x31010020 ); //
Velocity
ecrt_slave_config_sdo8( slave_config, 0x1A00, 0, 3 ); //
Number of PDO entries for 0x1A00
ecrt_slave_config_sdo16( slave_config, 0x1C13, 1, 0x1A00 ); //
TxPdo in 0x1C13:1
ecrt_slave_config_sdo8( slave_config, 0x1C13, 0, 1 ); //
Number of TxPDO
But I get this in the log:
Sep 26 10:10:06 ctrlPC5 kernel: [253808.144369] EtherCAT ERROR 0-2: SDO
download 0x1A00:00 (1 bytes) aborted.
Sep 26 10:10:06 ctrlPC5 kernel: [253808.144372] EtherCAT ERROR 0-2: SDO abort
message 0x06010002: "Attempt to write a read-only object".
Sep 26 10:10:06 ctrlPC5 kernel: [253808.144373] EtherCAT ERROR 0-2: SDO
configuration failed.
Is there something that needs to be enabled in order to configure?
The device seems to be configured for one magnet:
ethercat -m0 -p2 upload 0x2000 0x0b replies with 0x01 1
Best regards,
Joachim
________________________________
Från: Andreas Stewering-Bone
Skickat: Måndag, 26 september 2022 08:30
Till: Joachim Sällvin; etherlab-users@etherlab.org
Ämne: Re: [Etherlab-users] Failing to configure PDOs of a MTS Temposonics V
slave
Dear Joachim,
The master configures the specific slaves during application startup.
So no need to do it manually.
The PDO mapping for this slave is dynamically,
because you can configure the number of measurment magnets.
Please read the sensor EtherCAT documentation and the XML slave description.
With this information you can extend the cstruct to configure the specific PDO
mapping.
Please see the user space example in the master git repo.
Best regards
Andreas
Am Sonntag, dem 25.09.2022 um 17:08 +0000 schrieb Joachim Sällvin:
Hi all,
Any ideas on how to configure the pdos of a MTS Temposonics slave? A brand new
linear position sensor that doesn't seem to have any default configuration.
Shouldn't it be possible to configure it from the command line?
When I try I get:
SDO transfer aborted with code 0x08000000: General error (see details below),
why?
Some information about the system
ethercat slaves
Master0
0 1402:0 PREOP + ifm IO-Link Master AL1332
1 1401:0 PREOP + S300/S400/S600/S700 EtherCAT Drive (CoE)
2 1403:0 PREOP + MTS Device V
3 1444:0 PREOP + ifm IO-Link Master AL1332
ethercat -m0 -p2 cstruct
/* Master 0, Slave 2, "MTS Temposonics V"
* Vendor ID: 0x00000040
* Product code: 0x0000000f
* Revision number: 0x00000029
*/
ec_sync_info_t slave_2_syncs[] = {
{0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
{1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
{2, EC_DIR_OUTPUT, 0, NULL, EC_WD_ENABLE},
{3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
{0xff}
};
ethercat -m0 -p2 pdos
SM0: PhysAddr 0x1000, DefaultSize 128, ControlRegister 0x36, Enable 1
SM1: PhysAddr 0x1080, DefaultSize 128, ControlRegister 0x32, Enable 1
SM2: PhysAddr 0x1100, DefaultSize 0, ControlRegister 0x74, Enable 1
SM3: PhysAddr 0x1400, DefaultSize 448, ControlRegister 0x30, Enable 1
ethercat -m0 -p2 sdos
.....
SDO 0x1a00, "Magnet 1"
0x1a00:00, r-r-r-, uint8, 8 bit, "Number of elements"
0x1a00:01, rwrwrw, uint16, 16 bit, "Status"
0x1a00:02, rwrwrw, uint32, 32 bit, "Position"
0x1a00:03, rwrwrw, uint32, 32 bit, "Velocity"
0x1a00:04, rwrwrw, uint32, 32 bit, "Acceleration"
......
SDO 0x1c13, "Sync Manager TxPDO Assign"
0x1c13:00, rwrwrw, uint8, 8 bit, "Number of elements"
0x1c13:01, rwrwrw, uint16, 16 bit, ""
0x1c13:02, rwrwrw, uint16, 16 bit, ""
0x1c13:03, rwrwrw, uint16, 16 bit, ""
I thought I could do like this
sudo ethercat -m0 -p2 download 0x1C13 0 -tuint8 0 # Clear SM PDO 0x1c13
sudo ethercat -m0 -p2 download 0x1A00 0 -tuint8 0 # Clear TxPDO
0x1A00
ethercat -m0 -p2 download 0x1A00 2 -tuint32 0x31010020
SDO transfer aborted with code 0x08000000: General error
dmesg
Failed to process SDO request.
EtherCAT ERROR 0-2: SDO download 0x1A00:02 (4 bytes) aborted.
EtherCAT ERROR 0-2: SDO abort message 0x08000000: "General error".
EtherCAT ERROR 0-2: Failed to process SDO request.
Thanks,
Joachim Sällvin
Joachim Sällvin
--
Etherlab-users mailing list
Etherlab-users@etherlab.org
https://lists.etherlab.org/mailman/listinfo/etherlab-users
